|
|
Item Posts
Sort Order
|
|
|
|
Front axle u-joints
|
jimm2055
New User
| Posts: 2
| Joined: 02/12
Posted: 02/03/12
08:37 PM
|
|
How do I change the front axle u-joints on my 1980 CJ-7?
|
|
|
|
|
Posted: 02/04/12
07:00 AM
|
|
You've got to pretty much pull the outer ends of the axles apart. Start by removing the caliper and setting it aside, then the locking hub dial. Then, using a hub socket (available at any autoparts store) remove the hub and take the hub/rotor/bearing assembly off as a unit making sure the bearings don't fall out and get dirty.
Remove the spindle bolts, spindle, and backing plate and then you're free to pull the axleshaft assembly out through the knuckle.
Once you have the axleshaft assembly out, you're free to remove the U-joint C-clips, press out the U-joints, replace them, and reassemble.
Not is a good time to buy new inner grease seals for the back of the hub so you can remove the inner and outer bearings for cleaning and inspection. If they're good, repack with quality grease.
U-joint Replacement
|
|
|
|
jimm2055
New User
| Posts: 2
| Joined: 02/12
Posted: 02/04/12
11:29 AM
|
|
Thank you for the response, I appreciate it.
|
|
|
|
|
|
|
|
|