I am getting ready to put a 94 Wrangler tub on my CJ and I wanted to see if any of you here have done it. I was just to see what problems anyone has run into or if you have any time saving tips for me. I have almost got everything out of my CJ tub, looking forward to scrapping that piece of crap soon. I took out my wiring harness and labeled everything so it would be easier to put it all back in the correct place. I was wondering about the heater ductwork. Is there much difference in the CJ versus the Wrangler. The tub i am buying is bare so I will need to reuse my CJ stuff or buynew Wrangler stuff, just wondering if you guys had any advice.  

are you using your cj frame 2, im doin the same thing i have a full 90 yj on 33 micky thompson baja mtz and every thing under the body is messed (first 4x4 and i put it to work towin out the company bobcat a few 2 many times transfr case aint happy with me lol among other things) and i bought a 85 cj7 (same age as me) with 33 tsl superswampers 4 $800 and its unstopable so far but its a rust buckit takin the body mount bolts off 3 came out resembling tooth picks  

the main ting you will run into is some of the body mounts may not line up perfect but drilling a new hole next to it will do. the other thing is the windshield, the duct for the defrosters are not the same.if you can get the windshield frame with the tub that works best.the top will fit with either frame. if you cant you will need to cut new holes in the cowel on the tub.