|
Num Posts
Sort Order
|
Brett99
New User
| Posts: 3
| Joined: 08/08
Posted: 08/24/08
08:15 AM
|
|
last time I greased my c-arms the bearing in the zirk blew out. has any one replaced these, the originals are pressed in.
|
mudb8-
Moderator
| Posts: 3309
| Joined: 08/07
Posted: 08/24/08
11:49 AM
|
|
ya have the tube or cast bridge looking arms?
ya can replace it without taking the bushings out with a new self taping zirk
Has Stu Olson's VERY cool and extremely helpful website helped you fix/modify your Jeep over this past year? If so, please consider a donation to help Stu defray the costs of the hosting of his website. Go (right now!) to http://www.stu-offroad.com/support.htm and show your support for THE most widely used helpful Jeep site on the Internet!
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to
|
Brett99
New User
| Posts: 3
| Joined: 08/08
Posted: 08/24/08
02:52 PM
|
|
mudb8, tube arms, know an easy way to pull out the pressed in fittings
|
|
|
mudb8-
Moderator
| Posts: 3309
| Joined: 08/07
Posted: 08/24/08
07:41 PM
|
|
vice grips... keep twistin and pullin.
I had to change mine the same day I put on the lift.
Has Stu Olson's VERY cool and extremely helpful website helped you fix/modify your Jeep over this past year? If so, please consider a donation to help Stu defray the costs of the hosting of his website. Go (right now!) to http://www.stu-offroad.com/support.htm and show your support for THE most widely used helpful Jeep site on the Internet!
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to
|