I was doing research for my jeep looking for lift/axles/misc. I found a package deal on a web site(Iam not a spammer sorry no link) I found this for $11,000 what do u guys think deal or no deal. I have a 97 tj 4.0 with an old bent out 4" procomp lift with a rear diff that is starting to lock up, bent skid plate,  bent frame drop outs for control arms that have holes the size of quarters, etc. u get the picture.

1-RE Extreme Duty 5.5 Long Arm Kit.
Rubicon Express Monotubes
1-Short Shaft Kit from Advance Adapters.
1-Tom Woods CV Drive Shaft.
Front Rock Bumper From TxT
Rear Bumper and Tire Carrier from TxT
1-Daystar 1" Body Lift
1- 1" Motor Mount from M.O.R.E. (Rubber Bomb Proof);
4-Goodyear 35"12.5 R15 MTR's 4- Black Rock Crawler Rims
Ask about adding 37" tires or a 5th tire..
Grande Axle Kits Dana 30 with ARB and Dana 44 with ARB
ARB Compressor
Ring and Pinion Front and Rear
Ultimate Rock Steps from TxT
Sport Bar and 2 Spreaders from TxT
Oil Pan Skid Plate (Manual Required for this)
Kilby Gas Tank Skid Plate
Steering Box Skid from Kilby
TxT Winch Plate
Warn 9.5Ti Winch


Scam, good deal?
yayaya  

Can you afford that amount all at once? My wife would beat me with a shovel if I told her I wanted to spend 11K on my Jeep all at once. I'm sure I've spent that amount over the years as I also have a 97' TJ, but I spent it over an 11 year period. If you have the money to do it all at once, then great. What I had to do is by pieces here and there until I got the Jeep I wanted. I spent alot of time on e-Bay and got killer deals. To answer your question, I'm not sure if that is a good deal or not as I don't know what some of the items are going for. What helped save my butt is the fact that I'm a Machinist/Welder by trade. So I built alot of my own stuff. Good luck with the build.  

I wouldn't call it a scam, there's at least 9-10 grand worth of parts there, have you looked up the pricing of each items?

another thing is you can buy another tj already equipt with all those items for about 11-15 grand...
I've come accross some nice rubicons for under 14,000

using the 5.5 and a 1" body lift I'd opt for the 37's. if you have a 5 spd man tranny 5.13's or 5.38's is the gearing you'll want, I'm not so sure you'll get em for a d30 though, which really is insuficient for running lockers and 35's unless its gonna be a pavement princess.

send me a pm with the link, I'll check it out...  

First off, that's probably an old offering based on the fact that ToysByTroy is no longer. They shut down at the end of 2007.

I added it all up with the exception of the TxT sport bar, used prices from Quadratec, $500 frt bumper, $600 rear bumper, $300 rockers and came up with only $10,200. Quadratec is pretty much retail prices, so, no, probably not a good deal.  

Ironman not sure I would tell the wife the whole truth. Ebay might be a good place to start for me, I have ashopping list now. I have no skills as far as welding and will have to rely on friends

thanks  

Mudb8- No I havnt been able to piece these part out for a price. Good call on getting a used jeep with all this equipped, the only thing is that I have been with my jeep since new little attached lol.
I cant seem to send u a pm for some reason, send me a pm and i will respond.

thanks
yayaya  

ftgiles:
First off, that's probably an old offering based on the fact that ToysByTroy is no longer. They shut down at the end of 2007.

I added it all up with the exception of the TxT sport bar, used prices from Quadratec, $500 frt bumper, $600 rear bumper, $300 rockers and came up with only $10,200. Quadratec is pretty much retail prices, so, no, probably not a good deal.

Thanks, for doing the leg work for me I will check out Quadtatec when i get a chance.

I sent u a pm with link
yayaya  

ftgiles... was it a good link with old stock mabey?  

I sent u an email mudb8- ///i cant pm u for some reason