|
Num Posts
Sort Order
|
bjack350
New User
| Posts: 3
| Joined: 07/08
Posted: 07/01/08
07:12 PM
|
|
I just blew out the stock dana 30 in the front of my '82 cj7 and found a dana 60 out of a 80's? 1 ton chevy for free,but it is way wide. I was wondering if i could swap the rotors/hubs for non extended normal ones to bring the tires in.
|
mudb8-
Moderator
| Posts: 2300
| Joined: 08/07
Posted: 07/01/08
07:57 PM
|
|
drw?
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!
|
ftgiles
Enthusiast
| Posts: 689
| Joined: 05/08
Posted: 07/01/08
09:01 PM
|
|
Bet you could find a Dana 30 out of a CJ that's cheaper than your free Dana 60??
|
|
|
bjack350
New User
| Posts: 3
| Joined: 07/08
Posted: 07/02/08
05:06 PM
|
|
ya but that will just explode again with 480hp and 35's
|
ftgiles
Enthusiast
| Posts: 689
| Joined: 05/08
Posted: 07/02/08
06:01 PM
|
|
I think you missed the point.
|
mudb8-
Moderator
| Posts: 2300
| Joined: 08/07
Posted: 07/02/08
08:14 PM
|
|
ya may be able to unbolt the dually extention and install studs along with keeping the calipers, rotors and backing plates, that'll cost about 16 bucks.. and maybe a little grinding on the rotor.
you'll need a full size out back to match, a d44 is hardly enough axle for 35's and 480HP anyhow.
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!
|
bjack350
New User
| Posts: 3
| Joined: 07/08
Posted: 07/03/08
10:19 AM
|
|
that was a thought, I might take it apart to see if that will work. I've got a dana 60 for the rear too. Thanks
|