I just bought a 97 tj and i need to know if it will fit 33's with a 2" skyjacker spacer lift?Its stock with 32's on 10" wide rims but not much fender room.i thought about getting a 1" body lift too and see if the 33's would fit better then.  

I forgot to say that im 17 and on a tight buget untill christmas haha.i just want 33's with good on and off road proformace.I dont want to get into sye's and other expencive parts till the end of the year when i hopefully get a 4" procomp or taraflex.are they good lifts?thanks  

lengthen the bumpstops with the 2" for the 33's..
same deal they'll be close, and will work. the body lift could be a plus also.  

the kit comes with the bumpstops.do you think it will scrub with the 1" body?  

not with a 1" body lift and athe 2" spacers it wont..

theres a tj posted here thats on 33's with only a 1" body lift, it scrubs the flares some.  

found it...1" body lift and 33's..


 

this one is mine..2.5" rancho on 34x12.5-16 trXus M/T's

 

will my factory gearing pull the 33's decent?  

nice jeep by the way.  

if you have the auto and 3.73 gears you'll be ok..a 4.10 would be best

for the ax-15 five speed a minumum of 4.56.. would be my choice there. other wise the 5th gear will be prety much usless unless it's flat or down hill  

its a 4cyl with ax-5.fifth gear has no power but will still hold speed with the 32's.with 33's and 4.56 gears will the top speed be slower than it is now?it does 70 in fifth at 3,000rpm.thank you for your help.  

the ax-5 has a .85 fith gear ratio..
4.88's with 33's will be 2950 @70

4.56's are a bit tall for 33's and a 4cyl. that would be 2750 @70 and really gutless.

if your running 3 grand @70 now with 32's I'd have to say you already have 4.56's...4.10 which is what it likely had stock will run 81mph @3000rpm.  

on the lift Q..the teraflex is among the top of the line, the pro comp short arms and rough country are affordable and work well.  

i think its showing slower than what its realy going.  

yep the 32's will be solwer on a uncorrected spedo...