|
Num Posts
Sort Order
|
|
Posted: 11/30/07
06:51 PM
|
|
I have just bought a 80 cj7 with a chev 350 stock 4sp manual (haven't had time to see which one yet) and a dana 300. I want to use this drivetrain to fix my 76 cj5 that has a destroyed 258 t150 and dana 20. I was going to use the entire drivetrain from the cj7, but was wondering if my driveshafts would work? I have a dana 30 and amc 20 axles, which i don't want to change cause I have already rebuilt them with gears and lockers. Thanks
|
mudb8-
Moderator
| Posts: 2205
| Joined: 08/07
Posted: 11/30/07
07:15 PM
|
|
the front will work, the 80 may also have a amc 20.
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!
|
|
Posted: 12/01/07
09:31 PM
|
|
the 80 does have an amc 20. where is the extra 10" of the cj7 then? Also which transmission mount/skid plate will i need or are they the same?
|
|
|
|
mudb8-
Moderator
| Posts: 2205
| Joined: 08/07
Posted: 12/01/07
10:25 PM
|
|
http://www.jeeptech.com/models/cj-7.htm
I think I'd stick to the parts that are already together, probably just have to drill some holes.
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!
|
mudb8-
Moderator
| Posts: 2205
| Joined: 08/07
Posted: 12/01/07
10:26 PM
|
|
http://www.jeeptech.com/models/cj-7.htm
I think I'd stick to the parts that are already together, probably just have to drill some holes.
Help save TELLICO...VIRTUAL RALLY for Tellico...
http://www.pirate4x4.com/forum/showthread.php?p=8149649#post8149649
The rally will be on Wednesday May 7th from 4 to 9 pm Eastern Standard Time.
Be there and post up POSITIVE COMMENTS!!
|