|
Num Posts
Sort Order
|
ltmedic3
New User
| Posts: 4
| Joined: 03/07
Posted: 03/12/07
06:00 PM
|
|
I installed a lock right into my 80 cj front axle. Dana 30. When it should be locked up under load there is a loud clunking. It is as if it keeps disengaging. I thought it was the new hubs not working correctly, but I swapped the hubs around and the problem remained. The noise is only coming from the drivers side. Also when I drive down the road It pulls to the left as if the passenger wheel is the only one with power. As soon as I push in the clutch it goes back to straight. Any thoughts??
|
chutta
New User
| Posts: 10
| Joined: 01/07
Posted: 03/13/07
04:54 AM
|
|
Driver side U-joint?
|
|
Posted: 03/13/07
11:19 AM
|
|
Check the U-Joint. Then open up the axle and double check that the installation of the locker is correct.
So it's not a Jeep... sue me... it's still faster!
Questions? Comments? Concerns? PM Me!
|
|
|
ltmedic3
New User
| Posts: 4
| Joined: 03/07
Posted: 03/14/07
05:58 PM
|
|
both sides have new u joints
|